Throwing 30psi of BOOST At Ruby Before Her First Big Race! *FREEDOM WARNING*

Share
HTML-code

Comments • 2 264

  • James Bierce
    James Bierce  2 days back

    got the wrong headlight resto kit. Should look damn near new.

    • The GS Chronicles
      The GS Chronicles  1 weeks back

      I think Ruby would be the perfect candidate to do bundle of snakes header with 8-to-1 merge collector, then move the turbo forward and center. I love a big bump stick LS as much as the next person, but I figure you have enough in the fleet you could make one of them have a different sound.

      • Nicola Gwerder
        Nicola Gwerder  4 weeks back

        Take a polishing machine and some soft polish if the lights are crappy on the outside itll work. Dont polish too long otherwise they get hot.

        • Sherry Watts
          Sherry Watts  2 months back

          Put oil on the headlights with a rag it will help

          • Jacob Haun
            Jacob Haun  3 months back

            Sand those head light with 509 grit, then buff out with a wool pad and. 3m # 2 compound

            • phil mortlock
              phil mortlock  4 months back

              I love the cars and the channel but I'm getting a bit bored watching toast, ruby and Leroy do the same old thing.

              • ebf1003
                ebf1003  4 months back

                Love it, great channel

                • Donz Milky
                  Donz Milky  4 months back

                  Use off bug spray with deet on the headlight

                  • harzyj
                    harzyj  4 months back

                    U had the Mac valve plumbed backwards 🙄😂😂😂

                    If U look the the start of the video he has the air going in the left side and out the right then he has it going out the left and in the right so ofcourse it will cause sucking

                    • Mike Soda
                      Mike Soda  4 months back

                      Your tuning laptop needs an ssd lol.

                      • Tyler Lallemont
                        Tyler Lallemont  4 months back

                        Try wizards polish kit. Works wonders

                        • GLOBAL HEAT
                          GLOBAL HEAT  4 months back

                          Я давно думаю почему не модернизируют обычные машины ☺️

                          • Junior 249
                            Junior 249  4 months back

                            Happy that ruby is fix and ready to race.

                            • Kenneth Porst
                              Kenneth Porst  4 months back

                              ROMAN Atwood has a MONSTER TRUCK go check his channel😲🤯

                              • Ian Mcneeley
                                Ian Mcneeley  4 months back

                                What was that car sitting by ruby on the work emitz 👀

                                • Willis Cooper
                                  Willis Cooper  4 months back

                                  Ive never understood what the Co2 tanks for a boosted car do....please enlighten me

                                  • Dave Barrette
                                    Dave Barrette  4 months back

                                    Cleetus… I have asked Nick Leonard to ask you what your tire and wheel combo is on Ruby? He is obviously as busy as you and I are. hoping this question reaches you.

                                    • Paco Gruzska
                                      Paco Gruzska  4 months back

                                      To get a real good headlight job done you start at 600 grit get it all cloudy then go up till 2000 grit and use a buffing pad with a cutting fluid then polish and then a layer of clear coat

                                      • fleiva30
                                        fleiva30  4 months back

                                        Cleetus wazz up with the Joe Dirt haircut..?

                                        • Sam Weyers
                                          Sam Weyers  4 months back

                                          Add twin TURBSKIES

                                          • Powerslide Inc.
                                            Powerslide Inc.  4 months back

                                            I don't understand how CO2 can do anything but stall an engine...? it's literally a fire extiguisher
                                            Somebody ?

                                            • Robert Presti
                                              Robert Presti  4 months back

                                              hit those lights with wet sanding. plenty of videos on it. one hour each light and youre good!

                                              • Clint Arendall
                                                Clint Arendall  4 months back

                                                Mac valves are pieces of crap. give me a pnumatics any day a lot more reliable

                                                • Michael Crane
                                                  Michael Crane  4 months back

                                                  Those headlights are bad about hazing on the inside. You can bake them to loosen the adhesive and pull them apart and restore the inside....but thats your prerogative. haha

                                                  • MAC Valves
                                                    MAC Valves  4 months back

                                                    Greetings Cleetus & All subscribers - My name is Joe Richardson - Vice President of Sales @ MAC Valves. First of all - we appreciate all of your support in making MAC a preferred leader in solenoid boost control for turbo wastegates and more! We want to make sure you are all aware that there are many outlets - online & otherwise - selling counterfeit MAC product into this industry - especially the small three-ported valve seen in this video. If the MAC product does not come from one of our authorized distributors directly (www.macvalves.com/distributors) or from an OEM who sourced it from one of those distributors (like the Holley product used) to build into their product line - then we cannot be sure of its authenticity. MAC Valves are not available for sale directly from the factory and are only available through authorized distributors and OEMs who have integrated the product into their performance line of products. So beware impostors.

                                                    • Brad Noyes
                                                      Brad Noyes  4 months back

                                                      *watching video at 2x* WOW that engine's doing 14,000 RPM

                                                      • 2recklesskid
                                                        2recklesskid  4 months back

                                                        Just use wd40 for the headlights!!

                                                        • TreyTreyTrey
                                                          TreyTreyTrey  4 months back

                                                          Cleetus, best way to clear headlights, take a terry cloth hand towel, fold it twice, spray the hell out of it with mosquito repellent, then scrub the headlight for 5 minutes. It's cheap and works everytime

                                                          • H2o Mechanic
                                                            H2o Mechanic  4 months back

                                                            Columbus day Murica tribute video for today! I hope so

                                                            • BoraBora
                                                              BoraBora  4 months back

                                                              use a random car polish and after that wipe it down and hit it with some clearcoat.

                                                              • william killingsworth
                                                                william killingsworth  4 months back

                                                                Does the 14lbs spring not hold the gate shut on the 2 step? I have never heard y’all build more than 10 psi on the 2 step. Any time y’all raise the launch rpm you blow the tires off. Seems like co2 on the top port is an unnecessary complication.

                                                                Also try some heat shielding on your plug wires/exhaust manifold. Y’all seem like your constantly burning wires. Heat also increases resistance, header wrap would be helpful.

                                                                • DJ Statyk
                                                                  DJ Statyk  4 months back

                                                                  @8:45 watch the rear tire gap when he does the pull and watch after wards O_O

                                                                  • Ike
                                                                    Ike  4 months back

                                                                    i don't call turbochargers turbos anymore.. from now on i refer to them as FREEDOM SNAILS

                                                                    • midwestcorvette618
                                                                      midwestcorvette618  4 months back

                                                                      Love the solo Cleetus videos 👍🇺🇸

                                                                      • finding hackers
                                                                        finding hackers  4 months back

                                                                        Probably you regulator is putting 40 psi to your mac valve take off the regulator and see idk never worked on a dyno or as much as you on cars but I'm a welder and that regulator looks like the ones on the gas for the welder

                                                                        • Russell Patey
                                                                          Russell Patey  4 months back

                                                                          320 dumbasses that don't like white dudes! Damn liberal idiot's!

                                                                          • MeMad Max
                                                                            MeMad Max  4 months back

                                                                            Pls put a hood on ruby!!!

                                                                            • Jay YouTube
                                                                              Jay YouTube  4 months back

                                                                              Even though I don’t mess with engines, I do work work with Mac valves on a daily basis and they are pretty unreliable. They are very sensitive to temperature changes as well.. in short, I rarely ever see them work correctly under extreme conditions... glad you got her fixed, hell yeah brother!!

                                                                              • Frank Stermer
                                                                                Frank Stermer  4 months back

                                                                                You should look into putting compound turbos on ruby

                                                                                • JustAnotherGamingChannel
                                                                                  JustAnotherGamingChannel  4 months back

                                                                                  That mullet is coming right along boi's.

                                                                                  • Cassie
                                                                                    Cassie  4 months back

                                                                                    whatever clearcoat.

                                                                                • Ventra Plays
                                                                                  Ventra Plays  4 months back

                                                                                  When your turbos too big race car problem. 🤣😂

                                                                                  • Cassie
                                                                                    Cassie  4 months back

                                                                                    Keep sanding with high grit sandpaper. You know you're done when you spray water on it and it looks clear and clean wet, but fogs back up dry. Then wipe on wipe new or

                                                                                • Boomerang 9090
                                                                                  Boomerang 9090  4 months back

                                                                                  Wait did you do a burnout on the dyno?...’MERICA!!

                                                                                  • y K
                                                                                    y K  4 months back

                                                                                    That was the tyre rubbing on the fender, that's why he keeps a jack under the car to lift it slightly during pulls.

                                                                                • Cassie
                                                                                  Cassie  4 months back

                                                                                  The mullet looks like a beetle shedding it’s skin.

                                                                                  • Seth Bergile
                                                                                    Seth Bergile  4 months back

                                                                                    I'm an industrial mechanic and we use Mac valves on everything. Yes they fail, sometimes right out of the box. There are better brands out there. Either way you need to keep spares with you.

                                                                                    • Seth Bergile
                                                                                      Seth Bergile  4 months back

                                                                                      Also, check setting in ECM. Trying to run a 3 port valve with 2 port logic can create a venturi.

                                                                                  • Justin Barrett
                                                                                    Justin Barrett  4 months back

                                                                                    Love your' videos man. I was wondering if I could get the number of your' barber, so I can fuck his ass up for doing that to you.

                                                                                    • Cassie
                                                                                      Cassie  4 months back

                                                                                      Corvette really needs new headlights

                                                                                  • Tony Denny
                                                                                    Tony Denny  4 months back

                                                                                    ya the only headlight restore kit ive used that works is the one from 3M. but sometimes the fog is on the inside so its better to replace the entire headlight lens

                                                                                    • radiocontrolgreg
                                                                                      radiocontrolgreg  4 months back

                                                                                      What's with the floor jack? Car torquing over and rubbing the tire?

                                                                                      • 509srt
                                                                                        509srt  4 months back

                                                                                        im waiting for the video where Cleetus tunes Kyles Unicorn 🦄......